100% AUSTRALIAN

GASES

Argon 07

Argon 52@2x

GAS

Argon 07

Argon 07 is a smooth running general purpose shielding gas mixture suitable for both the short arc and spray transfer models. Suitable for use with solid wires on mild steels.

Typical Uses

  • Mig welding of Mild Steel (carbon steel)

Order the product:

Description

Argon 07 is a smooth running general purpose shielding gas mixture suitable for both the short arc and spray transfer models. Suitable for use with solid wires on mild steels.

Main hazards

  • Compressed high pressure gas in cylinders
  • Asphyxiant in high concentrations.

 

 

Typical Uses

  • Mig welding of Mild Steel (carbon steel)

 

 

 

Cylinder dimensions are approximate – variations may occur due to manufacturing tolerances

Height includes the valve

Container sizes may vary from state to state

 

 

Storage and handling

Ensure adequate ventilation for all cylinders and packs. Secure single cylinders in upright position and protect valves and manifolds from accidental damage.

  • Keep cylinders and packs in a cool area away from all sources of heat.
  • Close all valves when not in use.
  • Ensure all regulators and other devices attached to the cylinder outlets are free from oil and grease, and able to withstand contents pressures. Check for leaks regularly.
  • Do not store cylinders in an area where in an area where any leaking gas could accumulate.
  • If valve is damaged, do not attempt to operate.
  • If valve does not operate by hand, return the cylinder to the supplier (attach a “faulty” tag).

N.B. Only regulators, manifolds and ancillary equipment, rated for the appropriate pressure and compatible with the relevant gas, shall be connected to or downstream of these cylinders.

 

In case of leaks

  • If cylinder or pack is suspected of leaking, evacuate personnel from the direction in which the gas is likely to flow. Stop leak if possible.
  • Major leaks should only be approached with breathing apparatus.
  • If possible and if safe to do so, remove leaking cylinder or pack to a safe area outdoors and allow contents to empty into atmosphere.
  • Return empty cylinders and pack to supplier with a note to confirm the leak occurred
  • Notify emergency services if required